Simple test¶
Ensure your device works with this simple test.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 | # SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT
"""
This example sends MIDI out. It sends NoteOn and then NoteOff with a random pitch bend.
"""
import time
import random
import adafruit_ble
from adafruit_ble.advertising.standard import ProvideServicesAdvertisement
import adafruit_midi
from adafruit_midi.control_change import ControlChange
from adafruit_midi.note_off import NoteOff
from adafruit_midi.note_on import NoteOn
from adafruit_midi.pitch_bend import PitchBend
import adafruit_ble_midi
# Use default HID descriptor
midi_service = adafruit_ble_midi.MIDIService()
advertisement = ProvideServicesAdvertisement(midi_service)
# advertisement.appearance = 961
ble = adafruit_ble.BLERadio()
if ble.connected:
for c in ble.connections:
c.disconnect()
midi = adafruit_midi.MIDI(midi_out=midi_service, out_channel=0)
print("advertising")
ble.start_advertising(advertisement)
while True:
print("Waiting for connection")
while not ble.connected:
pass
print("Connected")
# Sleep briefly so client can get ready and send setup
# writes to the MIDIService. 0.5secs was insufficient.
time.sleep(1.0)
# Send one unique NoteOn/Off at the beginning to check that the
# delay is sufficient.
midi.send(NoteOn(20, 99))
midi.send(NoteOff(20, 99))
while ble.connected:
midi.send(NoteOn(44, 120)) # G sharp 2nd octave
time.sleep(0.25)
a_pitch_bend = PitchBend(random.randint(0, 16383))
midi.send(a_pitch_bend)
time.sleep(0.25)
# note how a list of messages can be used
midi.send([NoteOff("G#2", 120), ControlChange(3, 44)])
time.sleep(0.5)
print("Disconnected")
print()
ble.start_advertising(advertisement)
|