Introduction¶
Helper library for the Monster M4sk device. Allows usage of screens and other built-in hardware.
Dependencies¶
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Installing from PyPI¶
Note
This library will not be available on PyPI. Install documentation is included as a standard element.
Usage Example¶
import board
import displayio
from adafruit_display_shapes.circle import Circle
import adafruit_monsterm4sk
SCREEN_SIZE = 240
i2c_bus = board.I2C()
mask = adafruit_monsterm4sk.MonsterM4sk(i2c=i2c_bus)
left_group = displayio.Group()
mask.left_display.show(left_group)
right_group = displayio.Group()
mask.right_display.show(right_group)
right_circle = Circle(SCREEN_SIZE // 2, SCREEN_SIZE // 2, 40, fill=0x0000FF)
right_group.append(right_circle)
left_circle = Circle(SCREEN_SIZE // 2, SCREEN_SIZE // 2, 40, fill=0x00AA66)
left_group.append(left_circle)
while True:
pass
Contributing¶
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.
Documentation¶
For information on building library documentation, please check out this guide.